Sway Bar & End Link Kit — Performance Stabilization for Lifted Builds

Eliminates Body Roll. Recommended at 4 Inches and Above. Forged Hardware Throughout.

What's Included

Why Body Roll Increases with Lift Height

Compatible Platforms

Installation & Warranty

The Rize Industries Sway Bar & End Link Kit is a performance front stabilization package for lifted and leveled truck builds. When a truck's ride height is raised, its center of gravity moves upward and the factory sway bar end links operate at incorrect angles — reducing their effectiveness and increasing body roll in corners and during lane changes. At 4 inches of lift and above, the factory end links are often fully extended or compressed throughout the suspension travel range, providing essentially no roll resistance. Rize extended end links restore proper sway bar geometry at your lifted ride height, and the upgraded performance sway bar itself provides increased roll stiffness versus the factory unit for noticeably flatter cornering behavior. Polyurethane bushings throughout for long-term durability. Compatible with front sway bar mount points on all supported F-150, Silverado, Ram 1500, and Tacoma configurations.

Lifted trucks handle better with this kit. That's not marketing — it's geometry.

What's in the Box

1. One performance front sway bar, platform-specific diameter and stiffness rating, with polyurethane bushing kit
2. Two heavy-duty forged steel end links, extended for proper geometry at 2 to 6-inch lift heights
3. Grade 8 mounting hardware, sway bar bracket hardware, and printed install guide with torque specs

Key Features

• Extended end links restore proper sway bar operating angle at lifted ride height — the factory links go ineffective above 3 inches on most platforms
• Forged steel end link bodies with polyurethane bushings for long-term durability under repeated suspension cycling and off-road use
• Compatible with factory front sway bar mount points on all supported platforms — no frame modification or relocation required

View Fitment Guide →

Rize Sway Bar & End Link Kit ships with a 1-year warranty against manufacturing defects. Direct bolt-on, no cutting required.

Torque end link nuts to 40–50 ft-lbs and sway bar bracket bolts to 35–45 ft-lbs. Use a hex key through the ball stud to prevent spinning.

^{SEMA Member — Chatsworth, CA 91311}

_{Questions? Call (833) 628-3265 or email support@rizeind.com}